WithdrawalNoticeAcceptResponse Tabular View
COMT_RM020000GB01 | |
WithdrawalNoticeAcceptResponse |
An accept response to a Withdrawal Notice under the Care Act 2014 Schedule 3.
|
Used by: | |
[1..1] [M] classCode (CS { CNE: ActClass } ) { Fixed="INFRM" } |
Model Attribute Description The HL7 attribute classCode describes the type of act using a value from the ActClassRoot domain of the HL7 vocabulary ActClass. Implementation in XML Instance
|
[1..1] [M] moodCode (CS { CNE: ActMood } ) { Fixed="EVN" } |
Model Attribute Description The HL7 attribute moodCode uses a code to describe this class as a inform event. Implementation in XML Instance |
[1..1] [M] code (CV { CNE:SnomedCT } ) { Fixed="1025651000000109" } |
Model Attribute Description The HL7 attribute code uses a code from a SNOMED CT vocabulary to indicate that this is a Withdraw Notice Accept under the Care Act 2014 Schedule 3. Implementation in XML Instance The Coded with Code System flavour of the Coded Value (CV) data type shall be used to carry this information in the XML element code as follows:
|
[1..1] [M] effectiveTime (TS) |
The HL7 attribute effectiveTime is used to define the creation time of the CDA document. Implementation in XML Instance The XML attribute value of the XML element effectiveTime shall be populated with the time the document was created using a time stamp in the format yyyymmddhhmmss[+|-ZZzz] where:
Sections from the right of this representation may be left off when the sending system does not record to this level of accuracy. When hours are present, the time zone offset must also be present. |
[1..2] [M] id (SET<II>) |
Model Attribute Description Implementation in XML Instance The Identifier Global data type flavour shall be used to carry this information in the XML element id in the following way: The first instance of id shall DCE UUID to identify the service event as below:
When using a local identifier to further identify the service event for local use then:
|
[1..1] [M] author |
This class is a participant of authorship. It holds details of how and when the author authored the CDA document. |
[1..1] [M] typeCode (CS { CNE: ParticipationType } ) { Fixed="AUT" } |
Model Attribute Description The HL7 attribute typeCode uses a code to describe this class as an author participation. Implementation in XML Instance
|
[1..1] [M] contextControlCode (CS { CNE: ContextControl } ) { Fixed="OP" } |
Model Attribute Description The HL7 attribute contextControlCode uses a set of codes from the HL7 vocabulary ContextControl to determine whether participations associated with the parent section are conducted across to the child section (also associated with the child section). This set of codes also determine how these participations conduct. The conduction can only take place if the contextConductionInd is set to "true". The value of this attribute is fixed in the HL7 model to "OP":
Implementation in XML Instance
|
[1..1] [M] contentId (II) { "NPFIT-100030#Role" } |
Model Attribute Description The HL7 (NHS localisation) attribute contentId, when valued in an instance, provides a unique forward pointing identifier for the template which constrains the classes and attributes which follow, for NHS use. The attribute is intended simply as a structural navigational aid and should not be relied upon as an indicator of semantic meaning. The contentId is populated at runtime with a value from the allowed list contained in the model.
|
[1..1] [M] participant (AuthorChoice) |
A link to the choice of author templates.
|
[1..1] [M] primaryInformationRecipient |
This class is a primary information recipient participation. The primary information recipients of the clinical documents are usually expected to perform some action on receipt of a CDA document. There can be more than one primary recipient. |
[1..1] [M] typeCode (CS { CNE: ParticipationType } ) { Fixed="PRCP" } |
Model Attribute Description The HL7 attribute typeCode uses a code to describe this class as a primary information recipient participation. Implementation in XML Instance
|
[1..1] [M] contextControlCode (CS { CNE: ContextControl } ) { Fixed="OP" } |
Model Attribute Description The HL7 attribute contextControlCode uses a set of codes from the HL7 vocabulary ContextControl to determine whether participations associated with the parent section are conducted across to the child section (also associated with the child section). This set of codes also determine how these participations conduct. The conduction can only take place if the contextConductionInd is set to "true". The value of this attribute is fixed in the HL7 model to "OP":
Implementation in XML Instance
|
[1..1] [M] contentId (II) { "NPFIT-100022#Role" } |
Model Attribute Description The HL7 (NHS localisation) attribute contentId, when valued in an instance, provides a unique forward pointing identifier for the template which constrains the classes and attributes which follow, for NHS use. The attribute is intended simply as a structural navigational aid and should not be relied upon as an indicator of semantic meaning. The contentId is populated at runtime with a value from the allowed list contained in the model.
|
[1..1] [M] participant (RecipientChoice) |
A link to the choice of primary information recipient templates.
|
[1..1] [M] recordTarget |
A class which is a participation of record target (The patient whose record is the target for the information in the Document.) |
[1..1] [M] typeCode (CS { CNE: ParticipationType } ) { Fixed="RCT" } |
Model Attribute Description The HL7 attribute typeCode uses a code to describe this class as a record target participation. Implementation in XML Instance
|
[1..1] [M] contextControlCode (CS { CNE: ContextControl } ) { Fixed="OP" } |
Model Attribute Description The HL7 attribute contextControlCode uses a set of codes from the HL7 vocabulary ContextControl to determine whether participations associated with the parent section are conducted across to the child section (also associated with the child section). This set of codes also determine how these participations conduct. The conduction can only take place if the contextConductionInd is set to "true". The value of this attribute is fixed in the HL7 model to "OP":
Implementation in XML Instance
|
[1..1] [M] contentId (II) { "NPFIT-100021#Role" } |
Model Attribute Description The HL7 (NHS localisation) attribute contentId, when valued in an instance, provides a unique forward pointing identifier for the template which constrains the classes and attributes which follow, for NHS use. The attribute is intended simply as a structural navigational aid and should not be relied upon as an indicator of semantic meaning. The contentId is populated at runtime with a value from the allowed list contained in the model.
|
[1..1] [M] participant (Patient) |
A link to the patient role templates.
|
[1..1] [M] reference |
A reference to the Withdrawal Notice being accepted.
|
[1..1] [M] typeCode (CS { CNE: ActRelationshipType } ) { Fixed="REFR" } |
Model Attribute Description The HL7 attribute typeCode uses a code to describe the type of relationship as one of reference. Implementation in XML Instance
|
[1..1] [M] referredToReferredToWithdrawalNotification (ReferredToWithdrawalNotification) |
A link to the Withdrawal Notice being referred to.
|
[1..1] [M] responsibleParty |
A class which holds details of how the person was responsible for the encompassing encounter. Note this participation is required to be included if available on the sending system. |
[1..1] [M] typeCode (CS { CNE: ParticipationType } ) { Fixed="RESP" } |
Model Attribute Description The HL7 attribute typeCode uses a code to describe this class as a responsible party participation. Implementation in XML Instance
|
[1..1] [M] contextControlCode (CS { CNE: ContextControl } ) { Fixed="OP" } |
Model Attribute Description The HL7 attribute contextControlCode uses a set of codes from the HL7 vocabulary ContextControl to determine whether participations associated with the parent section are conducted across to the child section (also associated with the child section). This set of codes also determine how these participations conduct. The conduction can only take place if the contextConductionInd is set to "true". The value of this attribute is fixed in the HL7 model to "OP":
Implementation in XML Instance
|
[1..1] [M] contentId (II) { "NPFIT-100024#Role" } |
Model Attribute Description The HL7 (NHS localisation) attribute contentId, when valued in an instance, provides a unique forward pointing identifier for the template which constrains the classes and attributes which follow, for NHS use. The attribute is intended simply as a structural navigational aid and should not be relied upon as an indicator of semantic meaning. The contentId is populated at runtime with a value from the allowed list contained in the model.
|
[1..1] [M] participant (ResponsiblePartyChoice) |
A link to the choice of responsible parties.
|
AuthorChoice |
An abstract placeholder for the templates for an author.
|
Used by: WithdrawalNoticeAcceptResponse | |
[1..1] : Template2 | |
Patient |
An abstract placeholder for the templates of a patient.
|
Used by: WithdrawalNoticeAcceptResponse | |
[1..1] : Template3 | |
RecipientChoice |
An abstract placeholder for the templates of a recipient.
|
Used by: WithdrawalNoticeAcceptResponse | |
[1..1] : Template4 | |
ResponsiblePartyChoice |
An abstract placeholder for the templates of a responsible party.
|
Used by: WithdrawalNoticeAcceptResponse | |
[1..1] : Template5 | |
ReferredToWithdrawalNotification |
The Withdrawal Notice referred to for the Withdrawal Notice Accept Response.
|
Used by: WithdrawalNoticeAcceptResponse | |
[1..1] [M] classCode (CS { CNE: ActClass } ) { Fixed="INFRM" } |
Model Attribute Description The HL7 attribute classCode describes the type of act using a value from the ActClassRoot domain of the HL7 vocabulary ActClass. Implementation in XML Instance
|
[1..1] [M] moodCode (CS { CNE: ActMood } ) { Fixed="EVN" } |
Model Attribute Description The HL7 attribute moodCode uses a code to describe this class as a inform event. Implementation in XML Instance |
[1..1] [M] id (II) |
Model Attribute Description Implementation in XML Instance The Identifier Global data type flavour shall be used to carry this information in the XML element id in the following way: The first instance of id shall DCE UUID to identify the service event as below:
When using a local identifier to further identify the service event for local use then:
|